.
Corporate Structure Ownership Social Responsibility Group News Contact Us
Group Overview

Marine

Rail Heavy Engineering
MarineDivision Marine1Main
MarineTR
MarineBR

 
  DCD-DORBYL/ Marine/ National Ports Authority...

STURROCK GRAVING DOCK

Overall docking length
Length on floor (dock floor)
Width at entrance top
Width at bottom (dock floor)
Depth over entrance sill HWOST
360 m
350.4 m
45.1 m
38.4 m (max)
13.7 m

A docking length of 369.6 m can be obtained by placing the caisson in the emergency stop at the entrance. The dock can be divided into two compartments of either 132.5 m and 216.1 m or 205.7 m and 142.9 m respectively. Five cranes are provided ranged from 4 to 50 ton capacity.


SYNCROLIFT

Lifting capacity
Maximum length of vessel
Maximum width of vessel
1778 tons
61 m 15 m


ROBINSON GRAVING DOCK

Overall docking length
Length at bottom
Width at entrance
Depth over entrance sill HWOST
Two cranes provided
161.2 m
152.4 m
20.7 m
7.9 m


REPAIR QUAY

A repair quay and lay-up berths are available. The repair quay is 457 m long with an allowable draft of 12 m and is equipped with two cranes, one of 50 tons capacity and the other of 4 tons.


TOWAGE

Tugs owned and operated by Portnet

Cape Town Harbour

Click to Enlarge
W e   D e l i v e r   T h r o u g h   P a r t n e r s h i p
Disclaimer

Copyright reserved © 2009 DCD-DORBYL | Whilst all the information on this web site is presented in good faith, DCD-DORBYL and its service providers will not be held liable or accountable for any opinion, either expressed or implied, through this web site, or any other documentation.