Installing a Shingle Roof in Conover NC: What You Need to Know

When it comes to installing a shingle roof in Conover NC, there are some special considerations to keep in mind. The National Roofing Contractors Association (NRCA) and leading manufacturers of roofing materials recommend taking into account the use of vapor retarders when the outside temperature is average in January. This is because a square of roofing material usually weighs between 250 and 400 pounds, and a square equals one hundred square feet of roofing. Additionally, a drip-proof edge is a metal gasket that is placed along the edges of the roof to prevent water from running under the tiles and leaking through the roof covering.

In areas where two planes of the roof meet, such as in a valley, a special barrier against leaks is installed to stop water from entering under the roof tiles and entering the roof cover. Asphalt shingles are the most popular roofing material for residential homes in the United States, but they're not the only type of shingles you can use as part of your roofing system. Metal roofs have also become increasingly popular as an alternative roofing solution for homeowners looking to upgrade their roofs.

Getting Started with Your Roof Replacement

Beginning any roofing project, especially any roof replacement, can be intimidating for first-time DIYers.

After the old roof is removed, the roofing contractor will inspect the roof covering to make sure it is in good condition. Roofing professionals will not be able to inspect the roof and subfloor if they do not take off the existing shingle layer. If there are spongy, soft, or rotten areas on the roof covering, roofing contractors can only find out if they first remove the shingles. In general, it is not recommended to add a second layer to any product for roofs with steep slopes, as it can create hazardous conditions on the top.

Installing a shingle roof in Conover NC requires special attention and care. It's important to consider using vapor retarders when necessary and installing a drip-proof edge along the edges of your roof. Additionally, it's important to inspect your existing shingle layer before beginning any replacement project and avoid adding a second layer on roofs with steep slopes.